Call us now:
High-performance alloy products
Monel Alloy 400 Wire
Request Monel Alloy 400 Wire with the required standard, dimensions, tolerance, finish, inspection and mill test certificates from SAKY METAL.
Technical procurement data
Standards, supply and inspection
Monel Alloy 400 Wire is supplied as a wire within the high-performance alloy products family. A reliable enquiry identifies the exact designation, governing standard, dimensions, condition, inspection scope and documentation before quotation.
| Material / grade | Monel Alloy 400 Wire; the exact grade or temper must be confirmed on the purchase order because the legacy source contained a conflicting designation. |
|---|---|
| Product form | Wire |
| Standards and order reference | ASTM B164 |
| Dimensions and tolerances | State the required section or diameter, wall or thickness, length, tolerance, straightness or flatness, edge/end condition and machining allowance. |
| Surface and supply condition | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Inspection options | The inspection plan may include material identification, chemistry and mechanical-property review, dimensional and visual inspection. |
| MTC and traceability | Specify EN 10204 3.1 MTC or the required certificate type, heat/lot traceability, inspection reports, marking, packing list and any third-party release before order confirmation. |
| Typical applications | Typical enquiries cover springs, mesh, formed components, fasteners, welding consumables or electrical uses depending on alloy, temper and diameter. |
| RFQ checklist | Send the wire grade and standard, required dimensions and tolerance, quantity, surface/condition, inspection and certificate requirements, packing preference and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
- Standards : ASTM B164
- Grades : Monel 400
- Surface : Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated
- Technique : Cold Rolled, hot rolled
Specifications
Relevant Standards
Chemical Composition
Mechanical Properties
Specifications
| Grade | Monel 400 |
| Standard | ASTM B164 |
| Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Technique | Cold Rolled, hot rolled |
Relevant Standards
| STANDARD | UNS | EN | WERKSTOFF NR. |
| Monel 400 | N04400 | NiCu30Fe | 2.4360 |
Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Cr | Ni |
| Monel 400 | ≤0.3 | ≤0.2 | ≤0.5 | 0.024 | 28.0-34.0 | ≤2.5 | – | 63.0 |
Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 35000 , MPa – 240 | 40 % |
Why Choose Us?
You can get the perfect material according to your requirement at the least possible price.
We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
We guarantee to give a response within 24hours(usually in the same hour)
Provide SGS TUV report.
We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Provide one-stop service.
Packaging
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. SAKY METAL packages every order in numerous ways based on the products. We pack our products in multiple ways, such as,
Our Services
Cutting and Processing Services
Offering customized cutting and processing services to produce metal products that meet specific size and shape requirements.
Heat Treatment
Providing heat-treatment support for applicable metal products when hardness, strength, or other properties need to be adjusted.
Quality Control and Inspection
Implementing strict quality control and inspection processes to ensure that metal products meet relevant standards and customer requirements.
Get a Quote
Please fill in the form below to get a quotation for your project. Moreover, you can get more discount on your first order.
The price is affected by many factors, such as size, quantities, materials, etc., so please provide us with as much project information as possible. In this way, we can offer you the most accurate price shortly.
For more information, tailored products and solutions or any other requirements, you are also welcome to directly get in touch with us via WhatsApp or Email. (Tel/ WhatsApp : +8613764965049 Email: sales@sakymetal.com)