Call us now:
Technical procurement data
Standards, supply and inspection
Aluminium Alloy 2024 T351 Sheets Plates 2024-T351 aluminium plate provides a high strength-to-weight ratio and good machinability for structural parts. Because corrosion resistance is lower than many 5xxx and 6xxx alloys, buyers should define cladding, coating and final service protection at the enquiry stage.
| Material / grade | AA 2024 in T351 temper; temper and stretch-relief condition are stated on the MTC. |
|---|---|
| Product form | Sheet or plate |
| Standards and order reference | ASTM B209/B209M is a common commercial reference; aerospace orders may add the applicable AMS or purchaser specification. |
| Dimensions and tolerances | Thickness, width, length, flatness and sawing tolerance are quoted for the requested plate size; machining stock and grain direction should be identified on drawings. |
| Surface and supply condition | Mill finish, precision saw-cut blanks, protective film or specified conversion/anodizing preparation. |
| Inspection options | Chemistry, tensile properties, dimensions, flatness and surface inspection; ultrasonic quality requirements must be stated for critical thick plate. |
| MTC and traceability | EN 10204 3.1 or mill certificate, heat/lot traceability, inspection report and material identification. |
| Typical applications | Aircraft and transport structures, high-strength machined parts, jigs, fixtures and load-bearing components. |
| RFQ checklist | Send the sheet or plate grade and standard, required dimensions and tolerance, quantity, surface/condition, inspection and certificate requirements, packing preference and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
Aluminium Alloy 2024 T351 Sheets Plates
Source Aluminium Alloy 2024 T351 Sheets Plates from SAKY METAL in project-specific sizes and finishes, with mill test certificates, quality inspection and.
- Standards: ASTM B209 / ASME SB209
- Thickness : 0.2-250
- Type : Hot-Rolled (HR) / Cold-Rolled (CR) Sheet
- Surface : Bright, polished, hair line, brush, sand blast, embossed, etching, etc
Aluminum alloy 2024 T351 sheets and plates are a high-strength aluminum alloy with excellent properties, making them ideal for various applications. Aluminum alloy 2024 T351 sheets and plates offer excellent properties that make them an ideal choice for various applications. Their high strength, good machinability, corrosion resistance, weldability, fatigue resistance, heat treatability, and widespread use in the aerospace, automotive, and industrial machinery industries make them a popular choice for many applications.
Specifications
Relevant Standards
Chemical Composition
Mechanical Properties
Specifications
| Standards | ASTM B209 / ASME SB209 |
| Temper | T3,T4,T5, T6, T651 T6511 |
| Thickness | 0.2-300 |
| Width | 100-2600 |
| Length | 500-10000 |
| Surface | Bright, polished, hair line, brush, sand blast, embossed, etching, etc. |
| Finish | Mill, Customer specific finish |
| Aluminum Sheet/ Plate Coating | PVC Coated, Color Coated, Polyester, Fluorocarbon, polyurethane and epoxy coating |
| Type | Hot-Rolled (HR) / Cold-Rolled (CR) Sheet |
Relevant Standards
| European Standard | OLD | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) |
| AW-AlCu4Mg1 | AU4G1 | 3.1355 | A92024 | AlCu4Mg1 | 2024 | AlCuMg2 |
Chemical Composition
| Grade | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other |
| min. | Bal | 3.80 | 0.30 | 1.20 | ||||||
| max. | Bal | 0.50 | 0.50 | 4.90 | 0.90 | 1.80 | 0.10 | 0.25 | 0.15 | 0.05 |
Mechanical Properties
| Temper | Tensile Strength | Yield Strength | Elongation |
| KSI | KSI | % | |
| (annealed) | 32 | 14 | 12 |
| T3 | 63 | 42 | 15 |
Features & Benefits
- High strength-to-weight ratio: Aluminum alloy has a very high strength-to-weight ratio, making it an ideal material for use in applications where weight is a critical factor.
- Excellent fatigue resistance: This alloy has excellent resistance to fatigue, making it suitable for use in applications where the material will be subjected to cyclic loading.
- Good corrosion resistance: Aluminum alloy has good corrosion resistance, particularly in marine environments, which makes it suitable for use in applications such as shipbuilding and offshore structures.
Weldability: This alloy has good weldability, which means it can be easily welded using a variety of methods, including TIG, MIG, and friction stir welding.
Machinability: Aluminum alloy is also easily machinable, making it suitable for use in applications where complex shapes and features are required.
Part of Our Clients
Why Choose Us?
You can get the perfect material according to your requirement at the least possible price.
We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
We guarantee to give a response within 24hours(usually in the same hour)
Provide SGS TUV report.
We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Provide one-stop service.
Packaging
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. SAKY METAL packages every order in numerous ways based on the products. We pack our products in multiple ways, such as,
Our Services
Cutting and Processing Services
Offering customized cutting and processing services to produce metal products that meet specific size and shape requirements.
Heat Treatment
Providing heat-treatment support for applicable metal products when hardness, strength, or other properties need to be adjusted.
Quality Control and Inspection
Implementing strict quality control and inspection processes to ensure that metal products meet relevant standards and customer requirements.
Get a Quote
Please fill in the form below to get a quotation for your project. Moreover, you can get more discount on your first order.
The price is affected by many factors, such as size, quantities, materials, etc., so please provide us with as much project information as possible. In this way, we can offer you the most accurate price shortly.
For more information, tailored products and solutions or any other requirements, you are also welcome to directly get in touch with us via WhatsApp or Email. (Tel/ WhatsApp : +8613764965049 Email: sales@sakymetal.com)