Technical procurement data

Standards, supply and inspection

Aluminium Alloy 5005 Wires is supplied as a wire within the aluminium alloy products family. A reliable enquiry identifies the exact designation, governing standard, dimensions, condition, inspection scope and documentation before quotation.

Material / grade	5005
Product form	Wire
Standards and order reference	UNS A93003, ASTM B211
Dimensions and tolerances	5.5 – 400 mm
Surface and supply condition	Cold
Inspection options	The inspection plan may include material identification, chemistry and mechanical-property review, dimensional and visual inspection.
MTC and traceability	Specify EN 10204 3.1 MTC or the required certificate type, heat/lot traceability, inspection reports, marking, packing list and any third-party release before order confirmation.
Typical applications	Various applications due to its excellent combination of strength, formability, and corrosion resistance.
RFQ checklist	Send the wire grade and standard, required dimensions and tolerance, quantity, surface/condition, inspection and certificate requirements, packing preference and delivery destination.

Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.

Previous slide
Next slide

Aluminium Alloy 5005 Wires

Source Aluminium Alloy 5005 Wires from SAKY METAL in project-specific sizes and finishes, with mill test certificates, quality inspection and export-ready.

Standards : UNS A93003, ASTM B211
Grades : 5005
Diameter : 5.5 – 400 mm
Technique : Cold Forming, Heat Treatment, Stress Relieving and Welding

Aluminium alloy 5005 is a popular alloy that is commonly used in various applications due to its excellent combination of strength, formability, and corrosion resistance. Aluminium alloy 5005 wires are a common form of this alloy and are used in various applications that require good formability and moderate strength.

Specifications
Relevant Standards
Chemical Composition
Mechanical Properties
Specifications

Standards	UNS A95052, ASTM B211
Grades	EN AW-5005 A,UNS A95005
Diameter	5.5 – 400 mm
Length	10 – 10000 mtr
Technique	Cold Forming, Heat Treatment, Stress Relieving and Welding

Relevant Standards

STANDARD	UNS	USA	EN	GERMANY
5005	A95005	5005	AW-5005 A	Al99.5

Chemical Composition

Grade	Si	Fe	Cu	Mg	Mn	Zn	Al
5005	≤0.3	≤0.07	≤0.2	0.5-1.1	≤0.2	≤0.25	rem

Mechanical Properties

Temper	0.2% Proof Stress, MPa min†	Tensile Strength, MPa	Elongation % min‡
O (annealed)	35	105 – 145	12 – 22
H12	95	125 – 165	2 – 8
H14	115	145 – 185	1 – 6
H16	135	165 – 205	1 – 3
H18	–	> 185	1 – 3
H32	85	115 – 160	3 – 9
H34	105	135 – 180	2 – 7
H36	125	160 – 200	1 – 4
H38	–	> 180	1 – 4

Features & Benefits

High strength-to-weight ratio: Aluminum alloy has a very high strength-to-weight ratio, making it an ideal material for use in applications where weight is a critical factor.

Excellent fatigue resistance: This alloy has excellent resistance to fatigue, making it suitable for use in applications where the material will be subjected to cyclic loading.

Good corrosion resistance: Aluminum alloy has good corrosion resistance, particularly in marine environments, which makes it suitable for use in applications such as shipbuilding and offshore structures.

Weldability: This alloy has good weldability, which means it can be easily welded using a variety of methods, including TIG, MIG, and friction stir welding.
Machinability: Aluminum alloy is also easily machinable, making it suitable for use in applications where complex shapes and features are required.

Part of Our Clients

Why Choose Us?

You can get the perfect material according to your requirement at the least possible price.

We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.

The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)

We guarantee to give a response within 24hours(usually in the same hour)

Provide SGS TUV report.

We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Provide one-stop service.

Packaging

1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. SAKY METAL packages every order in numerous ways based on the products. We pack our products in multiple ways, such as,

Our Services

Cutting and Processing Services

Offering customized cutting and processing services to produce metal products that meet specific size and shape requirements.

Heat Treatment

Providing heat-treatment support for applicable metal products when hardness, strength, or other properties need to be adjusted.

Quality Control and Inspection

Implementing strict quality control and inspection processes to ensure that metal products meet relevant standards and customer requirements.

Get a Quote

Please fill in the form below to get a quotation for your project. Moreover, you can get more discount on your first order.

The price is affected by many factors, such as size, quantities, materials, etc., so please provide us with as much project information as possible. In this way, we can offer you the most accurate price shortly.

For more information, tailored products and solutions or any other requirements, you are also welcome to directly get in touch with us via WhatsApp or Email. (Tel/ WhatsApp : +8613764965049 Email: sales@sakymetal.com)