Previous slide
Next slide
H13 Tool Steel 1.2344 X40CrMoV5-1 SKD61 Hot Work Steel Bar
  • Material: 1.2344 /X40CrMoV5-1
  • Dia.: 8mm – 400mm
  • Standard : ASTM A681
  • Surface : Black, Rough Machined, Turned or as per given requirements.

Steel Bar

H13 Steel BAr

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.
AISI H-13 tool steel is characterized by:
Good resistance to abrasion at both low and high temperatures
High level of toughness and ductility
Uniform and high level of machinability and polishability
Good high-temperature strength and resistance to thermal fatigue
Excellent through-hardening properties
Very limited distortion during hardening
In steel H13, the molybdenum and vanadium act as strengthening agents. The chromium content assists die steel H-13 to resist softening when used at high temperatures. H-13 die steels offers an excellent combination of shock and abrasion resistance, and possesses good red hardness. It is capable of withstanding rapid cooling and resists premature heat checking. Tool Steel H13 has good machinability, good weldability, good ductility, and can be formed by conventional means.
Due to H13 tool steel excellent combination of high toughness and fatigue resistance, AISI H13 hot work tool steel is used more than any other tool steel in tooling applications.

Application of AISI H13 Tool Steel

PartAluminium, mag­nesium alloys, HRCCopper al­loys HRCStainless steel HRC
Dies, Backers, die-holders, liners, dummy blocks, stems44-5043-4745-50
Austenitizing temperature1,870-1,885°F1,900-1,920°F

Features & Benefits

  • Titanium possesses outstanding corrosion resistance, able to withstand the corrosive effects of seawater, acids, and most chemical media.
  • Titanium rods exhibit an excellent strength-to-weight ratio, being one of the lightest structural materials. 
  • Titanium is a biocompatible material, showing good compatibility with human tissues and bones.
  • Titanium exhibits excellent stability at high temperatures, maintaining strength and stability in high-temperature environments.
  • Titanium is a non-magnetic material, making it suitable for applications where magnetic sensitivity is a concern frequency operation.
  • Titanium has good formability, making it easy to process into various shapes. 

Part of Our Clients

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus.

Why Choose Us?

You can get the perfect material according to your requirement at the least possible price.

We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.

The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)

We guarantee to give a response within 24hours(usually in the same hour)

Provide SGS TUV report.

We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.

Provide one-stop service.

Previous slide
Next slide

Feedback From Our Clients

AISI A2 tool steel takes a place between AISI O1 and AISI D2, offering an excellent combination of good wear resistance and toughness. It may be regarded, therefore, as a“universal” cold work steel.For cutting operations the good toughness of AISI A2 steel gives excellent resistance to chipping of the cutting edge. In many cases tools made from this A2 steel have given better tooling economy than high-carbon, high-chromium steels of the D3/ W.-Nr. 2080 type. AISI steel A2 has much better machining and grinding properties.Typical Applications for AISI/ASTM A2 steels materials: Blanking dies, block and ring gauges, coining, cold forming, cold trimming and forming dies, cold shears, rolls, knurls and knurling tools, machine parts, mandrels, punches and punch plates, reamers, shear and slitter blades, stamping dies and threading tapes.


1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Saky Metal’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,


Our Services

Cutting and Processing Services

Offering customized cutting and processing services to produce titanium products that meet specific size and shape requirements.

Heat Treatment

Providing heat treatment services when adjustments to the performance of titanium products, such as changes in hardness or strength, are needed.

Quality Control and Inspection

Implementing strict quality control and inspection processes to ensure that titanium products meet relevant standards and customer requirements.

Get a Quote

Please fill in the form below to get a quotation for your project. Moreover, you can get more discount on your firs order.

The price is affected by many factors, such as size, quantities, materials, etc., so please provide us with as much project information as possible. In this way, we can offer you the most accurate price shortly.

For more information, tailored products and solutions or any other requirements, you are also welcome to directly get in touch with us via WhatsApp or Email. (Tel/ WhatsApp :  +8613764965049   Email: