Call us now:
Technical procurement data
Standards, supply and inspection
S32205 Duplex Steel Bar UNS S32205 duplex bar combines austenitic-ferritic corrosion resistance with higher strength than conventional 300-series stainless steel. Procurement should control heat treatment, ferrite balance and traceability because these directly affect welding and chloride service performance.
| Material / grade | UNS S32205 / EN 1.4462; S31803 may be considered only when the project specification permits the chemistry range. |
|---|---|
| Product form | Bar |
| Standards and order reference | Common references are ASTM A276 or ASTM A479 with ASTM A484/A484M general requirements; project-specific NORSOK or purchaser requirements can be added. |
| Dimensions and tolerances | Round, square or flat bar dimensions, length, straightness and machining allowance are supplied to the stated ASTM/EN tolerance or customer drawing. |
| Surface and supply condition | Hot finished, solution annealed and pickled, peeled, ground or polished depending on machining and corrosion requirements. |
| Inspection options | PMI, ferrite measurement, dimensional inspection and ultrasonic testing can be specified; corrosion testing is performed only when required by the order. |
| MTC and traceability | EN 10204 3.1 MTC with heat chemistry, mechanical properties and heat-treatment record; third-party inspection can be arranged. |
| Typical applications | Marine shafts, chemical-processing components, pump and valve parts, desalination equipment and oil-and-gas hardware. |
| RFQ checklist | Send the bar grade and standard, required dimensions and tolerance, quantity, surface/condition, inspection and certificate requirements, packing preference and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
Request S32205 Duplex Steel Bar with the required standard, dimensions, tolerance, finish, inspection and mill test certificates from SAKY METAL.
- Specification: ASTM A240 / ASME SA240
- Thickness: 0.4 ～ 100.0mm
- Material: UNS No. S 31803, S 32205, S 32550, S 32750, S 32760
- Surface: Hot rolled plate (HR). Cold rolled sheet (CR). 2B. 2D. BA No.4 with pvc Coated
SAKY METAL Duplex 2205 sheet is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels.
 |  |  |
| Duplex Steel S32205 Plate | S32205 Duplex Steel Plate | 2205 Duplex Steel Plate |
Specifications
Relevant Standards
Specifications
| Material | UNS No. S 31803, S 32205, S 32550, S 32750, S 32760 |
| Specification | ASTM A240 / ASME SA240 |
| Size Range | 1000mmx2000mm, 1219mmx2438mm, 1219mmx3048mm,1500x3000mm |
| Thickness | 0.4 ～ 100.0mm |
| Manufacturers | Outokumpu, SAKY METAL, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Surface | Hot rolled plate (HR). Cold rolled sheet (CR). 2B. 2D. BA No.4 with pvc Coated |
| Services | Waterjet cutting, Plasma cutting, Laser cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Relevant Standards
| Grade | GB | UNS No. | AFNOR | EN No. | France | JIS |
| Lean Duplex | 00Cr23Ni4N | UN23 (SAF2304） | SS232 （SAF2304） | W．Nr.1.4362 | UR35N | DP11 |
| Duplex SS | 00Cr18Ni5Mo3Si2 00Cr22Ni5Mo3N | UNS S31500 UNS S31803 | SS2376(3RE60) SS2377(SAF2205) | W.Nr.1.4417 W.Nr.1.4462 | UR45N | DP1 DP8 |
| 0Cr25Ni5Mo2 00Cr25Ni7Mo3WCuN | UNS S32900 UNS S31260 | SS2324(10RE51) | W.Nr.1.4460 W.Nr.1.4501 | 329J1 329J2L | ||
| Super Duplex | 00Cr25Ni7Mo4N 00Cr25Ni6Mo3CuN | UNS S32750 UNS S32550 | SS2328(SAF2507) | W.Nr.1.4410 W.Nr.1.4507 | UR47N+ UR52N+ | |
| Hyper Duplex | UNS S32707 |
Features & Benefits
- High Strength: Duplex Steel 2205 has excellent strength and toughness properties, making it suitable for use in high-pressure and high-stress applications.
- Corrosion Resistance: The Duplex Steel 2205 Pipe Tube has excellent corrosion resistance properties, making it suitable for use in aggressive environments such as the chemical, petrochemical, and marine industries.
- High Temperature Resistance: Duplex Steel 2205 Pipe Tube is highly resistant to high-temperature environments, making it suitable for use in heat exchangers, boilers, and other high-temperature applications.
Good Weldability: Duplex Steel 2205 Pipe Tube has excellent weldability and can be easily welded using standard welding techniques.
- Cost-Effective: Despite its superior properties, Duplex Steel 2205 Pipe Tube is a cost-effective alternative to other high-performance alloys, making it suitable for use in projects where cost is a significant factor.
Part of Our Clients
Why Choose Us?
You can get the perfect material according to your requirement at the least possible price.
We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
We guarantee to give a response within 24hours(usually in the same hour)
Provide SGS TUV report.
We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Provide one-stop service.
Feedback From Our Clients
Duplex Steel Pipe Tube have several notable advantages, making them favored in various applications.
Packaging
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. SAKY METAL packages every order in numerous ways based on the products. We pack our products in multiple ways, such as,
Our Services
Cutting and Processing Services
Offering customized cutting and processing services to produce metal products that meet specific size and shape requirements.
Heat Treatment
Providing heat-treatment support for applicable metal products when hardness, strength, or other properties need to be adjusted.
Quality Control and Inspection
Implementing strict quality control and inspection processes to ensure that metal products meet relevant standards and customer requirements.
Get a Quote
Please fill in the form below to get a quotation for your project. Moreover, you can get more discount on your first order.
The price is affected by many factors, such as size, quantities, materials, etc., so please provide us with as much project information as possible. In this way, we can offer you the most accurate price shortly.
For more information, tailored products and solutions or any other requirements, you are also welcome to directly get in touch with us via WhatsApp or Email. (Tel/ WhatsApp : +8613764965049 Email: sales@sakymetal.com)