Call us now:
Quick answer: Cr12MoV Cold Work Tool Steel Round Bar is available for made-to-order and project supply. Cr12MoV is a molybdenum- and vanadium-alloyed high-carbon, high-chromium cold-work die steel used for wear-resistant dies, punches and cutting tools. Quote confirmation is based on the governing specification, required dimensions, delivery condition, inspection scope and authenticated mill availability.
Request Cr12MoV Cold Work Tool Steel Round Bar by standard, size and finish, with inspection and mill test certificates from SAKY METAL.
Technical procurement data
Standards, supply and inspection
Cr12MoV Cold Work Tool Steel Round Bar Cr12MoV is a molybdenum- and vanadium-alloyed high-carbon, high-chromium cold-work die steel used for wear-resistant dies, punches and cutting tools.
| Material / grade | Cr12MoV |
|---|---|
| Product form | Round Bar |
| Standards and order reference | GB/T or another explicitly agreed Chinese specification and revision; do not assume interchangeability from a short grade name alone. |
| Dimensions and tolerances | Diameter and length to enquiry; straightness, diameter tolerance and machining allowance agreed before production |
| Surface and supply condition | Black, peeled, turned, centerless-ground or customer-specified |
| Inspection options | Chemistry, hardness, dimensions, visual inspection and ultrasonic testing where ordered. |
| MTC and traceability | EN 10204 3.1 MTC or agreed certificate type with heat/lot traceability. |
| Typical applications | precision blanking dies, cold-forming and drawing tools, thread-rolling and forming components, slitters, gauges and wear parts |
| RFQ checklist | Send grade/specification, dimensions, quantity, condition, inspection, documentation and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
SAKY METAL supplies Cr12MoV as round bar for cold-work tooling and engineered wear applications. Available production routes include hot-rolled, forged, peeled, turned or ground solid round bar. Every order is reviewed against the drawing, finished tool size, machining allowance, heat-treatment plan and documentation requirements.
| Grade | Cr12MoV |
|---|---|
| Material family | Cold-work tool steel |
| Product form | Round Bar |
| Specification basis | GB/T or another explicitly agreed Chinese specification and revision; do not assume interchangeability from a short grade name alone. |
| Supply route | hot-rolled, forged, peeled, turned or ground solid round bar |
| Dimensions | Diameter and length to enquiry; straightness, diameter tolerance and machining allowance agreed before production |
| Surface options | Black, peeled, turned, centerless-ground or customer-specified |
| Processing services | saw cutting, peeling, turning, centerless grinding, drilling and preparation of near-net blanks |
| Documentation | EN 10204 3.1 MTC or agreed certificate type, heat/lot traceability and inspection reports as ordered |
Grade Characteristics
Cr12MoV is a molybdenum- and vanadium-alloyed high-carbon, high-chromium cold-work die steel used for wear-resistant dies, punches and cutting tools.
- High abrasive-wear resistance
- Good hardenability and compressive-strength potential
- Controlled heat treatment can provide useful dimensional stability for precision tooling
Ordering note: Specify the governing standard, required annealed hardness, cleanliness, carbide-control expectations and final heat-treatment route at enquiry stage.
Typical Applications
The correct grade and hardness must be selected from the actual failure mechanism—abrasive or adhesive wear, edge chipping, gross cracking, plastic deformation or dimensional change. Typical enquiries include:
- precision blanking dies
- cold-forming and drawing tools
- thread-rolling and forming components
- slitters, gauges and wear parts
- punches, shafts, rolls, pins, cutters and cylindrical tooling inserts
Delivery Condition and Processing
Material is normally quoted in an annealed machining condition unless the purchase order requires another approved condition. Available services can include saw cutting, peeling, turning, centerless grinding, drilling and preparation of near-net blanks. Requested decarburization allowance, machining stock, grain-flow direction and test locations should be shown on the drawing.
Heat treatment is not one universal cycle. Austenitizing, quenching, tempering, sub-zero treatment and surface coating must follow the actual certified grade, section size, furnace capability and final hardness requirement. Obtain approval before substituting a related grade.
Inspection, MTC and Traceability
The inspection plan may include positive material identification, chemical-composition review, annealed hardness, dimensions, straightness or flatness, visual surface inspection, decarburization checks, and ultrasonic testing where section size and service criticality justify it. Third-party inspection can be coordinated when stated before quotation.
Specify EN 10204 3.1 certification or the required certificate type, heat and lot traceability, marking, packing, country-of-origin requirements and any approved-mill list in the RFQ. Final compliance is defined by the purchase order, approved drawing and issued mill documentation.
How to Request a Quote
- State the exact grade and governing standard or approved producer datasheet.
- Send diameter and length to enquiry; straightness, diameter tolerance and machining allowance agreed before production.
- Define quantity, delivery condition, surface, machining allowance and final application.
- List hardness, ultrasonic, cleanliness, certification, marking and third-party inspection requirements.
- Provide the delivery destination and required schedule.
Request a quote for Cr12MoV Round Bar
Frequently Asked Questions
Can you cut Cr12MoV round bar to size?
Yes. Cutting and machining options depend on size, tolerance, quantity and delivery condition. Send a drawing or finished dimensions so machining allowance can be reviewed.
Is Cr12MoV supplied with an MTC?
Certification can be supplied as ordered. State EN 10204 3.1 or another required certificate type and any authenticated-producer requirement before quotation.
Can Cr12MoV be substituted with a related cold-work grade?
Only after engineering and customer approval. Similar application groups can have different chemistry limits, carbide structures, heat-treatment schedules, dimensional response and trademark status.
What information is needed for heat treatment?
Provide the certified grade, section size, target hardness, service failure mode, dimensional requirements and any coating or EDM operations. The heat treater should use the governing standard or current producer datasheet.