Call us now:
Quick answer: SKS3 Cold Work Tool Steel Plate is available for made-to-order and project supply. SKS3 is a JIS alloy cold-work tool steel used for oil-hardened dies, gauges and cutting tools where machinability and a balanced property profile are important. Quote confirmation is based on the governing specification, required dimensions, delivery condition, inspection scope and authenticated mill availability.
Request SKS3 Cold Work Tool Steel Plate with the required standard, dimensions, tolerance, finish, inspection and mill test certificates from SAKY METAL.
Technical procurement data
Standards, supply and inspection
SKS3 Cold Work Tool Steel Plate SKS3 is a JIS alloy cold-work tool steel used for oil-hardened dies, gauges and cutting tools where machinability and a balanced property profile are important.
| Material / grade | SKS3 |
|---|---|
| Product form | Plate |
| Standards and order reference | JIS G 4404, with the applicable revision, delivery condition and supplementary requirements stated in the purchase order. |
| Dimensions and tolerances | Thickness, width and length to enquiry; tolerances and machining allowance agreed before production |
| Surface and supply condition | Black/as-rolled, shot-blasted, milled, precision-ground or customer-specified |
| Inspection options | Chemistry, hardness, dimensions, visual inspection and ultrasonic testing where ordered. |
| MTC and traceability | EN 10204 3.1 MTC or agreed certificate type with heat/lot traceability. |
| Typical applications | small and medium blanking dies, gauges and measuring tools, punches, cutters and shear knives, general cold-work tooling |
| RFQ checklist | Send grade/specification, dimensions, quantity, condition, inspection, documentation and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
SAKY METAL supplies SKS3 as plate for cold-work tooling and engineered wear applications. Available production routes include hot-rolled, forged or sawn plate; optional milling, grinding and custom-cut blanks. Every order is reviewed against the drawing, finished tool size, machining allowance, heat-treatment plan and documentation requirements.
| Grade | SKS3 |
|---|---|
| Material family | Cold-work tool steel |
| Product form | Plate |
| Specification basis | JIS G 4404, with the applicable revision, delivery condition and supplementary requirements stated in the purchase order. |
| Supply route | hot-rolled, forged or sawn plate; optional milling, grinding and custom-cut blanks |
| Dimensions | Thickness, width and length to enquiry; tolerances and machining allowance agreed before production |
| Surface options | Black/as-rolled, shot-blasted, milled, precision-ground or customer-specified |
| Processing services | saw cutting, waterjet cutting where suitable, milling, grinding, drilling and preparation of six-side-machined blanks |
| Documentation | EN 10204 3.1 MTC or agreed certificate type, heat/lot traceability and inspection reports as ordered |
Grade Characteristics
SKS3 is a JIS alloy cold-work tool steel used for oil-hardened dies, gauges and cutting tools where machinability and a balanced property profile are important.
- Good machinability in annealed supply
- Balanced toughness and wear resistance
- Suitable for precision tools of appropriate section size
Ordering note: Cross-references to O1-type grades are approximate unless the required standard and chemistry are confirmed. Heat-treatment practice must match the actual certified material.
Typical Applications
The correct grade and hardness must be selected from the actual failure mechanism—abrasive or adhesive wear, edge chipping, gross cracking, plastic deformation or dimensional change. Typical enquiries include:
- small and medium blanking dies
- gauges and measuring tools
- punches, cutters and shear knives
- general cold-work tooling
- die blocks, bolster and wear plates, large inserts and flat tooling blanks
Delivery Condition and Processing
Material is normally quoted in an annealed machining condition unless the purchase order requires another approved condition. Available services can include saw cutting, waterjet cutting where suitable, milling, grinding, drilling and preparation of six-side-machined blanks. Requested decarburization allowance, machining stock, grain-flow direction and test locations should be shown on the drawing.
Heat treatment is not one universal cycle. Austenitizing, quenching, tempering, sub-zero treatment and surface coating must follow the actual certified grade, section size, furnace capability and final hardness requirement. Obtain approval before substituting a related grade.
Inspection, MTC and Traceability
The inspection plan may include positive material identification, chemical-composition review, annealed hardness, dimensions, straightness or flatness, visual surface inspection, decarburization checks, and ultrasonic testing where section size and service criticality justify it. Third-party inspection can be coordinated when stated before quotation.
Specify EN 10204 3.1 certification or the required certificate type, heat and lot traceability, marking, packing, country-of-origin requirements and any approved-mill list in the RFQ. Final compliance is defined by the purchase order, approved drawing and issued mill documentation.
How to Request a Quote
- State the exact grade and governing standard or approved producer datasheet.
- Send thickness, width and length to enquiry; tolerances and machining allowance agreed before production.
- Define quantity, delivery condition, surface, machining allowance and final application.
- List hardness, ultrasonic, cleanliness, certification, marking and third-party inspection requirements.
- Provide the delivery destination and required schedule.
Request a quote for SKS3 Plate
Frequently Asked Questions
Can you cut SKS3 plate to size?
Yes. Cutting and machining options depend on size, tolerance, quantity and delivery condition. Send a drawing or finished dimensions so machining allowance can be reviewed.
Is SKS3 supplied with an MTC?
Certification can be supplied as ordered. State EN 10204 3.1 or another required certificate type and any authenticated-producer requirement before quotation.
Can SKS3 be substituted with a related cold-work grade?
Only after engineering and customer approval. Similar application groups can have different chemistry limits, carbide structures, heat-treatment schedules, dimensional response and trademark status.
What information is needed for heat treatment?
Provide the certified grade, section size, target hardness, service failure mode, dimensional requirements and any coating or EDM operations. The heat treater should use the governing standard or current producer datasheet.