Call us now:
Quick answer: Viking / 1.2631 Cold Work Tool Steel Forging is available for made-to-order and project supply. Uddeholm Viking / 1.2631 is a high-alloy cold-work tool steel designed to combine toughness and wear resistance for heavy-duty blanking and forming. Quote confirmation is based on the governing specification, required dimensions, delivery condition, inspection scope and authenticated mill availability.
Request Viking / 1.2631 Cold Work Tool Steel Forging by standard, size and finish, with inspection and mill test certificates from SAKY METAL.
Technical procurement data
Standards, supply and inspection
Viking / 1.2631 Cold Work Tool Steel Forging Uddeholm Viking / 1.2631 is a high-alloy cold-work tool steel designed to combine toughness and wear resistance for heavy-duty blanking and forming.
| Material / grade | Viking / 1.2631 |
|---|---|
| Product form | Forging |
| Standards and order reference | Uddeholm Viking producer specification and W.Nr. 1.2631 reference where explicitly required; Viking is a proprietary designation. |
| Dimensions and tolerances | Finished or forging dimensions to drawing; forging ratio, machining allowance and tolerances agreed during technical review |
| Surface and supply condition | As-forged, shot-blasted, rough-machined, fully machined or customer-specified |
| Inspection options | Chemistry, hardness, dimensions, visual inspection and ultrasonic testing where ordered. |
| MTC and traceability | EN 10204 3.1 MTC or agreed certificate type with heat/lot traceability. |
| Typical applications | heavy-duty blanking and forming dies, industrial shear knives, cold-work tools exposed to shock loading, packaging-industry tooling |
| RFQ checklist | Send grade/specification, dimensions, quantity, condition, inspection, documentation and delivery destination. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
SAKY METAL supplies Viking / 1.2631 as forging for cold-work tooling and engineered wear applications. Available production routes include open-die forged blocks, discs, rings, shafts or drawing-specific near-net shapes, subject to grade and mill capability. Every order is reviewed against the drawing, finished tool size, machining allowance, heat-treatment plan and documentation requirements.
| Grade | Viking / 1.2631 |
|---|---|
| Material family | Cold-work tool steel |
| Product form | Forging |
| Specification basis | Uddeholm Viking producer specification and W.Nr. 1.2631 reference where explicitly required; Viking is a proprietary designation. |
| Supply route | open-die forged blocks, discs, rings, shafts or drawing-specific near-net shapes, subject to grade and mill capability |
| Dimensions | Finished or forging dimensions to drawing; forging ratio, machining allowance and tolerances agreed during technical review |
| Surface options | As-forged, shot-blasted, rough-machined, fully machined or customer-specified |
| Processing services | open-die forging, heat treatment, saw cutting, rough machining, boring and ultrasonic inspection where specified |
| Documentation | EN 10204 3.1 MTC or agreed certificate type, heat/lot traceability and inspection reports as ordered |
Grade Characteristics
Uddeholm Viking / 1.2631 is a high-alloy cold-work tool steel designed to combine toughness and wear resistance for heavy-duty blanking and forming.
- Excellent balance of toughness and wear resistance
- Good dimensional stability during heat treatment
- Good machinability, grindability and resistance to edge chipping
Ordering note: Viking is a trademarked producer grade associated with W.Nr. 1.2631. Authenticate trademark supply and use the current Uddeholm instructions for heat treatment and coating.
Typical Applications
The correct grade and hardness must be selected from the actual failure mechanism—abrasive or adhesive wear, edge chipping, gross cracking, plastic deformation or dimensional change. Typical enquiries include:
- heavy-duty blanking and forming dies
- industrial shear knives
- cold-work tools exposed to shock loading
- packaging-industry tooling
- large die blocks, rings, heavy inserts, shafts and high-load tooling components
Delivery Condition and Processing
Material is normally quoted in an annealed machining condition unless the purchase order requires another approved condition. Available services can include open-die forging, heat treatment, saw cutting, rough machining, boring and ultrasonic inspection where specified. Requested decarburization allowance, machining stock, grain-flow direction and test locations should be shown on the drawing.
Heat treatment is not one universal cycle. Austenitizing, quenching, tempering, sub-zero treatment and surface coating must follow the actual certified grade, section size, furnace capability and final hardness requirement. Obtain approval before substituting a related grade.
Inspection, MTC and Traceability
The inspection plan may include positive material identification, chemical-composition review, annealed hardness, dimensions, straightness or flatness, visual surface inspection, decarburization checks, and ultrasonic testing where section size and service criticality justify it. Third-party inspection can be coordinated when stated before quotation.
Specify EN 10204 3.1 certification or the required certificate type, heat and lot traceability, marking, packing, country-of-origin requirements and any approved-mill list in the RFQ. Final compliance is defined by the purchase order, approved drawing and issued mill documentation.
How to Request a Quote
- State the exact grade and governing standard or approved producer datasheet.
- Send finished or forging dimensions to drawing; forging ratio, machining allowance and tolerances agreed during technical review.
- Define quantity, delivery condition, surface, machining allowance and final application.
- List hardness, ultrasonic, cleanliness, certification, marking and third-party inspection requirements.
- Provide the delivery destination and required schedule.
Request a quote for Viking / 1.2631 Forging
Frequently Asked Questions
Can you cut Viking / 1.2631 forging to size?
Yes. Cutting and machining options depend on size, tolerance, quantity and delivery condition. Send a drawing or finished dimensions so machining allowance can be reviewed.
Is Viking / 1.2631 supplied with an MTC?
Certification can be supplied as ordered. State EN 10204 3.1 or another required certificate type and any authenticated-producer requirement before quotation.
Can Viking / 1.2631 be substituted with a related cold-work grade?
Only after engineering and customer approval. Similar application groups can have different chemistry limits, carbide structures, heat-treatment schedules, dimensional response and trademark status.
What information is needed for heat treatment?
Provide the certified grade, section size, target hardness, service failure mode, dimensional requirements and any coating or EDM operations. The heat treater should use the governing standard or current producer datasheet.