Call us now:
High-Alloy Nickel-Chromium-Molybdenum Filler
ERNiCrMo-10 wire for C-22-type joining and corrosion-resistant overlay
ERNiCrMo-10 is a nickel-chromium-molybdenum bare filler-metal classification under AWS A5.14 and is commonly associated with C-22-type alloy fabrication. It may be evaluated for joining, repair, dissimilar welding and overlays where the procedure calls for this classification and the service environment has been reviewed.
ClassificationERNiCrMo-10
Primary useC-22-type joining and overlay welding
Supply routeSpool wire & cut rods
Request ERNiCrMo-10 nickel alloy welding wire by standard, size and finish, with inspection and mill test certificates from SAKY METAL.
Technical procurement data
Standards, supply and inspection
ERNiCrMo-10 Nickel-Chromium-Molybdenum Alloy Welding Wire | N06022 | DIN 2.4638 ERNiCrMo-10 is a nickel-chromium-molybdenum bare filler-metal classification under AWS A5.14 and is commonly associated with C-22-type alloy fabrication. It may be evaluated for joining, repair, dissimilar welding and overlays where the procedure calls for this classification and the service environment has been reviewed.
| Material / grade | ERNiCrMo-10; GB/T HNS3308; JIS Not listed in the supplied cross-reference; DIN 2.4638; N06022 alloy-family cross-reference |
|---|---|
| Product form | Bare solid welding wire on spool and straight cut-length filler rods by enquiry; other bare-wire packages subject to review. |
| Standards and order reference | AWS A5.14/A5.14M classification; state required revision plus project, code and WPS references. |
| Dimensions and tolerances | Specify welding process, wire or rod diameter, cut length where applicable, spool or package type and tolerance. |
| Surface and supply condition | Clean bare filler metal, securely packaged to limit handling damage and contamination; storage requirements by purchase order. |
| Inspection options | Visual and dimensional inspection, classification or chemistry review, traceability and purchaser-specific testing by agreement. |
| MTC and traceability | Certificate of conformance and heat or batch traceability; EN 10204 documentation or additional records when agreed. |
| Typical applications | C-22-type nickel-alloy equipment; Chemical and pollution-control systems; Corrosion-resistant weld overlay; Dissimilar and repair welding under an approved WPS |
| RFQ checklist | Grade and standard revision; base metals; process; diameter; package; quantity; WPS; testing; certificates; destination; service conditions. |
Final compliance is defined by the purchase order, approved drawing and issued mill documentation. Availability is confirmed for each grade, size and production route.
SAKY METAL reviews ERNiCrMo-10 enquiries against the stated classification, welding process, diameter, package, base materials, WPS, service conditions, inspection scope and documentation. Availability is confirmed for each requested combination; no stock, mechanical-property or corrosion-performance claim is implied without an agreed specification.
Selection note: Specify the complete filler classification and standard revision. For aggressive service, include all process-media data and any weld-deposit corrosion, chemistry or mechanical test requirements.
Grade Designations and Cross-References
| Product designation | ERNiCrMo-10 bare welding electrode / rod |
|---|---|
| AWS order reference | AWS A5.14/A5.14M ERNiCrMo-10; confirm the required standard revision |
| GB/T cross-reference | HNS3308 |
| JIS cross-reference | Not listed in the supplied cross-reference |
| DIN / European reference | 2.4638 |
| Alloy-family reference | N06022 alloy-family cross-reference |
| Important | Cross-references support material review but are not blanket substitution approvals. The purchase order, applicable standard revision and qualified WPS govern acceptance. |
Supply Forms and Ordering Parameters
| GMAW / MIG | Bare solid wire on spool or basket by enquiry; specify diameter, package style and net weight. |
|---|---|
| GTAW / TIG | Straight cut-length filler rods by enquiry; specify diameter, rod length, package and identification. |
| Other processes | Submerged-arc or other bare-wire requirements are reviewed against the process, wire/flux combination and governing procedure. |
| Dimensions | Diameter and tolerance must be stated on the RFQ; availability is confirmed for the requested process and package. |
| Identification | Grade, classification, batch or heat reference, size and package identification as required by the purchase order. |
| Documentation | Certificate of conformance, chemistry or classification records and EN 10204 documents when agreed. |
Typical Application Areas
- C-22-type nickel-alloy equipment
- Chemical and pollution-control systems
- Corrosion-resistant weld overlay
- Dissimilar and repair welding under an approved WPS
These application areas are selection prompts rather than design approvals. Confirm filler compatibility through engineering review, the governing construction code and a qualified welding procedure.
Quality, Traceability and Welding Control
Before productionVerify grade, batch and WPS
Match package identification and certificates to the released procedure before wire enters production.
During weldingControl procedure variables
Use the qualified process, shielding system, heat-input range, interpass limit and contamination controls.
After weldingInspect to the project plan
Apply the specified visual, NDT, mechanical, chemistry or corrosion tests and retain traceability records.
Send a Complete ERNiCrMo-10 Welding Wire RFQ
Include ERNiCrMo-10 and the applicable standard revision, both base metals, welding process, wire or rod diameter, package or rod length, quantity, WPS or project specification, shielding requirements, inspection and certificate scope, delivery destination and relevant service conditions.
Related Welding Wire Products
- ERNiCrMo-3 Nickel-Chromium-Molybdenum Alloy Welding Wire | N06625 | DIN 2.4831
- ERNiCrMo-4 Nickel-Chromium-Molybdenum Alloy Welding Wire | N10276 | DIN 2.4886
- ER309 Stainless Steel Welding Wire | YS309 | DIN 1.4332/1.4337
- ER316 Molybdenum-Bearing Stainless Steel Welding Wire | YS316 | DIN 1.4430
- ER2209 Duplex Stainless Steel Welding Wire | YS2209 | DIN 1.4462
- Browse All Metal Products
ERNiCrMo-10 Welding Wire FAQs
Is ERNiCrMo-10 a base-metal grade?
No. It is a bare filler-metal classification. N06022 is the associated alloy-family cross-reference shown for procurement context.
What should be specified for overlay work?
State substrate, overlay thickness, number of layers, dilution limit, surface preparation, process, testing and acceptance criteria.
Can special chemistry testing be requested?
Yes. Define the governing classification, additional chemistry limits, sampling, laboratory requirements and certificate type in the purchase order.
What information controls final product acceptance?
The purchase order, cited classification and revision, approved WPS, agreed test plan, package identification and issued material documentation control acceptance.
Technical References
References define classification scope and selection context. They do not replace the project specification, current standard revision, qualified procedure or supplied certificate.